The Arlo Doorbell is a smart and innovative device that enhances home security by providing homeowners with a convenient way to monitor their front door. It combines the functionality of a traditional doorbell with the advanced features of a security camera, allowing you to see and communicate with visitors remotely. The Arlo Doorbell offers features such as motion detection, video recording, two-way audio, and integration with the Arlo app, providing you with peace of mind and added convenience.

arlo doorbell installationProper Arlo Doorbell setup is crucial to ensure its optimal performance. Without the correct Arlo Doorbell installation, you may encounter issues such as poor connectivity, malfunctioning features, or even complete failure of the device. By following the recommended Arlo doorbell setup procedures and understanding how to troubleshoot common problems, you can maximize the functionality and effectiveness of your Arlo Doorbell. In this post, we will guide you through the setup Arlo Doorbell and installation process, as well as provide troubleshooting tips to address common issues that may arise.

How to set up Arlo Doorbell:

Installing an Arlo doorbell is a straightforward process that allows you to enhance the security of your home and receive real-time notifications when someone is at your door. Arlo doorbells are wireless devices that can be easily integrated into your existing doorbell system or used as standalone units. Here’s a step-by-step guide to help you with the Arlo doorbell installation process:

Before you begin the Arlo Doorbell installation, make sure you have all the required materials handy. This typically includes the Arlo doorbell unit, mounting bracket, screws, screwdriver, and the Arlo mobile app installed on your smartphone.

  • Choose a suitable location: Decide where you want to install the doorbell unit. It should be placed near your front door, preferably at eye level. Ensure that the location provides a clear view of the area you want to to set up arlo doorbell
  • Power off your existing doorbell: If you are replacing your old doorbell, start by turning off the power supply to avoid any electrical mishaps. Locate the circuit breaker or fuse box & switch off the power to the doorbell circuit.
  • Remove the old doorbell: Unscrew and remove the existing doorbell from the mounting bracket. Disconnect any wiring attached to it, taking note of the wire colors and their respective terminals.
  • Install the Arlo doorbell mounting bracket: Attach the Arlo doorbell mounting bracket to the wall or door frame using the provided screws. Ensure that it is securely fastened and level.
  • Connect the wiring: If you are connecting the Arlo doorbell to your existing doorbell system, match the wire colors from the old doorbell to the corresponding terminals on the Arlo doorbell unit. Typically, this involves connecting the wires to the “Front” and “Trans” terminals. Follow the instructions provided in the Arlo app or user manual for accurate wiring connections to install Arlo Doorbell.
  • Attach the Arlo doorbell unit: Carefully align the Arlo doorbell unit with the mounting bracket and slide it into place. Secure it using the provided screws.
  • Power on the doorbell circuit: Restore power to the doorbell circuit by switching on the corresponding breaker or fuse.
  • Set up the Arlo doorbell in the app: For set up Arlo doorbell to app, open the Arlo mobile app on your smartphone and follow the on-screen instructions to add the doorbell to your Arlo system. This typically involves scanning a QR code on the doorbell or entering a unique code.
  • Configure doorbell settings: Customize your doorbell settings through the Arlo app. You can adjust motion detection sensitivity, customize notifications, and set up Arlo Doorbell’s other preferences according to your needs.
  • Test the doorbell: After completing the installation and setup Arlo Doorbell process, it’s important to test the doorbell to ensure it’s functioning correctly. Press the doorbell button or simulate a motion event to trigger a notification on your smartphone. Verify that you receive the notification and can view the live video feed from the Arlo doorbell.

Congratulations! You have successfully installed your Arlo doorbell. You can now enjoy the added security and convenience it offers by monitoring your front door and communicating with visitors remotely through the Arlo app.

In the further section, we have shared information for troubleshooting Common problems that you may face with the Arlo doorbell. User can follow the steps mentioned in the next section to fix the issues with your Arlo Doorbell.

Arlo Doorbell Not Working Problems:

arlo doorbell not workingWhen your Doorbell encounters issues and suddenly you notice Arlo Doorbell stopped working, it can be frustrating and impact the security of your home. There are two common areas where problems can arise: connection and recording. In terms of connection, factors like weak Wi-Fi signal, distance from the base station, and interference from other devices can cause Arlo doorbell not connecting issue. When it comes to recording, incorrect settings in the Arlo app, insufficient storage capacity, and compatibility with Arlo Camera models can be potential culprits. By troubleshooting these issues through steps such as restarting, checking settings, and verifying power sources, you can fix Arlo Doorbell not working & restore the functionality of your Arlo Doorbell to ensure reliable home security monitoring.

Arlo Doorbell Not Connecting:

When your Arlo Doorbell won’t connect, it can disrupt its functionality and compromise home security monitoring. Several factors may contribute to this Arlo Doorbell not connecting issue:

  • Weak Wi-Fi Signal: Ensure that the doorbell is within range of your Wi-Fi router & consider using Wi-Fi extenders or a mesh network to improve coverage.
  • Distance from Base Station: If the doorbell is too far from the base station, it may struggle to establish a stable connection. Try moving the base station closer to doorbell.
  • Interference: Other electronic devices like cordless phones can interfere with the connection. Relocate or turn off such devices to minimize interference.

arlo doorbell not connectingTroubleshooting steps:

  • Restart the Arlo Doorbell and the base station.
  • Check for firmware updates for both devices.
  • Verify the power source and battery level of the doorbell.
  • Adjust Wi-Fi settings to optimize signal strength.
  • Contact Arlo customer support for further assistance if needed.

By addressing these potential causes of Arlo Doorbell won’t connect and following the troubleshooting steps, you can resolve Arlo Doorbell not connecting issues and restore the functionality of your Arlo Doorbell.

Arlo Doorbell Not Recording:

Another common issue that users may encounter is the Arlo doorbell not recording footage. This can impact the device’s ability to capture important events and monitor activity. There are several factors that could contribute to this problem:

  • Incorrect Settings in the Arlo App: Check the settings in the Arlo app to ensure that motion detection and recording are properly configured for the doorbell. Adjust the sensitivity and detection zones as needed to ensure accurate recording.
  • Insufficient Storage Capacity: If your Arlo system has limited storage capacity, it may not be able to record new footage. Consider upgrading to a larger storage plan or deleting older recordings to free up space for new ones.

arlo doorbell not recordingTroubleshooting steps:

  • Check the settings in the Arlo app and ensure that motion detection and recording features are enabled for the doorbell.
  • If storage capacity is limited, consider upgrading your Arlo storage plan or delete older recordings to free up space.
  • Update the firmware of both the doorbell and the Arlo base station to ensure they are running the latest software versions.

If the issue persists, contacting Arlo customer support can provide further assistance and guidance tailored to your specific situation.

By addressing the potential causes and following these troubleshooting steps, you can resolve the Arlo Doorbell recording issue and ensure that it captures and stores footage effectively for your home security needs.

How to Reset Arlo Doorbell:

Factory reset Arlo Doorbell can be necessary in certain situations, such as troubleshooting persistent issues or preparing the device for resale. It allows you to start fresh and restore the doorbell to its original configuration. Here’s a step-by-step guide to reset Arlo Doorbell:

  • Locate the reset button: There is a small reset button on the back or bottom of the Arlo Doorbell,.
  • Press and hold the reset button: You have to use a paperclip or a similar tool, press and hold the Arlo Doorbell reset button for about 10 seconds until you see the LED light on the doorbell flash to reset arlo doorbell
  • Release the reset button: You have to release the Arlo Doorbell reset button once the LED light flashes amber.
  • Wait for the reset process: The Arlo Doorbell will undergo a reset process, indicated by the LED light flashing amber and then turning solid blue. The factory reset Arlo Doorbell process may take a few minutes.
  • Reconnect the doorbell: After the factory reset Arlo Doorbell process completion, you will need to start the Arlo Doorbell setup process and connect the doorbell again following the initial setup process.

It is necessary to reset Arlo Doorbell to factory settings in cases where troubleshooting steps have not resolved persistent issues. It can help clear any configuration errors, restore default settings, and provide a clean slate for reconfiguring the device. Additionally, if you are selling or transferring the doorbell to someone else, resetting it ensures that your personal data and settings are erased, maintaining privacy and security.


set up arlo doorbellProper Arlo Doorbell setup, troubleshooting, and maintenance are essential for ensuring the optimal performance. By following the steps mentioned above in this guide, you can effectively set up Arlo Doorbell, troubleshoot common issues such as connection problems and recording failures, and perform a factory reset when necessary.

Remember to consider factors like Wi-Fi signal strength, placement for optimal coverage, and compatibility with Arlo Camera models during the setup process. When troubleshooting, be diligent in checking settings, verifying power sources, and updating firmware to address issues related to connectivity and recording.

By investing time and effort into the setup and maintenance of your Arlo Doorbell, you can enjoy the peace of mind that comes with enhanced home security and seamless monitoring capabilities. Users can also navigate to the Arlo Support page to know more about Arlo device setup & troubleshooting related issues.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes:

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>